Impregnating sealers for stain and graffiti protection

 

DRY-TREAT 40SK™


Surface Consolidator. DRY-TREAT 40SK™ is a water repellent impregnating sealer, which protects against water and salt damage and helps to strengthen friable surfaces. 


Particularly popular for protecting softer, highly porous natural stones 
and concrete paving in salt water environments.

 

BENEFITS

  • Super water repellent
  • Consolidates and strengthens friable materials, such as sandstone and softer limestones and travertines
  • Protects surfaces against water damage, salt efflorescence, spalling, alkali silica reactions and freeze-thaw damage.
  • Retards moss and mildew growth.
    Retains existing colour and finish as well as the slip resistance of the surface.
  • 15 YEAR PERFORMANCE WARRANTY available when applied by a Dry-Treat Accredited Applicator

 

TYPICAL APPLICATIONS

DRY-TREAT 40SK™ is suitable for pool surrounds, outdoor paved areas, facades, cladding and other outdoor exposed surfaces. Popular for protecting sandstone, limestone and travertine around salt water swimming pools. Also used for damp course injecting..


 

SEAL FOR LIFE - environmental credentials

DRY-TREAT 40SK is packaged in recyclable containers.




SUITABLE SURFACES INCLUDE (but are not limited to):

basalt grout saltillo
bluestone granite sandstone
brick limestone slate
cement pavers  marble terracotta
clay pavers polished porcelain terrazzo
concrete pavers quarry tiles travertine
concrete quartz  

 

APPLICATION RATE

Total application rate is approximately one quart per 0.5 to 5 sq. metres (50 to 100 sq. feet) depending on absorption.
 

PRECAUTIONS, SAFETY DIRECTIONS & STORAGE

Do not take internally. Apply when surface temperature is between 5 - 35ºC (40 - 95ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.

 

FIRST AID

If swallowed, contact a physician. DO NOT induce vomiting. If skin contact occurs remove contaminated clothing and wash skin thoroughly. If irritation persists, contact a physician. If in eyes, hold open, flood with water for at least 15 minutes and contact a physician. If vapours breathed relocate to fresh air. If symptoms persist contact a physician.

 

ACTIVE CONTENT

40 per cent active content in an organic solvent

 

PACK SIZE

1 Quart / 946 mL, 1 Gallon / 3.8 Litre or 5 Gallon / 18.9 Litre

 

COUNTRY OF MANUFACTURE

USA